Cyclades AlterPath BladeManager Bedienerhandbuch PDF herunterladen (Seite 45)

Chapter 4: Administration Introduction 31

Before enabling SNMP, depending on the version of SNMP in use, the administrator will need

some or all of the information in the following table.

Table 4.5: Values for Configuring SNMP

Values Description

SysContact Email address of the SP manager administrator

SysLocation Location of the SP manager

OID Object Identifier. A unique indentifier for each object in an SNMP MIB. The OID

naming scheme is in the form of an inverted tree with branches pointing

downward. The OID naming scheme is governed by the Internet Engineering

Task Force (IETF), which grants authority for parts of the OID name space to

individual organizations. Cyclades has the authority to assign OIDs that can be

derived by branching downward from the node in the MIB name tree that starts

at 1.3.6.1.4.1.4413.

SNMP version (also

called protocol)

•v1 - Uses a community string match for authentication

•v2c - Uses a community string match for authentication

•v3 - Uses a username for authentication. In addition to the username, an

optional authentication password may be used. An encryption password

also may be used for encrypting traffic. Cyclades recommends that both

authentication and encryption be used to maximize the security of data and

commands. Available authentication methods are MD5 or SHA. Available

encryption methods are DES and AES.

Community For SNMP v1 and v2c only the community name is used for authentication. An

arbitrary string, with a maximum length of 256 characters. Does not need to

match the community name used on the public side or be unique on the private

side. Must match the community string expected by the target device,

often public.

Source For SNMP v1 and v2c only.

• Default

•Use IP - Enter an IP for the source target device in the field if you select this

option. If the default is selected, then all traps from all source IPs are

forwarded to the destination IP.

For configuring SNMP v3 only:

Auth Level/Security level No auth - Applies to v1 and v2c by default and is an option in v3.

Auth

Auth & crypt

User name Username to be used for authentication.

Auth method • MD5

•SHA

Auth pass Optional password used for authentication. Must be either empty or at least

eight characters.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 239 240

Kommentare zu diesen Handbüchern

Keine Kommentare

Cyclades AlterPath BladeManager Bedienerhandbuch Seite 45

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Server Cyclades AlterPath BladeManager